Pecan wood heating

Overview
Easyfit
Fit to existing
Decorative looks
Specifications
Wonderfire home


Pecan Engineering for Nectre wood heaters, gas log fires and The Wonderfire range of gas flame heaters

Wood heating Gas log fire by Nectre Wood and gas heating from Wonderfire Contact us about our wood and gas heater range Wood and gas heating from Pecan Engineering, South Australia

Pecan Engineering also manufacture a range of solar lights,solar energy systems and accessories.
www.pecansolar.com.au

© Pecan Engineering 2000


slow combustion heating and gas fire heating - The Nectre and Wonderfire
Wonderfire gas flame

slow combustion heating and gas fire heating Specifications
Wonderfire

Type l Gas Open Fire(Models AF16OF & AF180F)This is perhaps the simplest way to make your existing fireplace into an open gas fire. There are two models to chose from, the AF1 6OF or the AF1 80F. Just check the dimensions to find which Wonderfire will best fit your fireplace.

They can be placed into existing fireplaces using a new free standing grate or perhaps your existing grate can be adapted. Your Wonderfire dealer will be pleased to advise which is the best model for you.

Specifications: Natural Gas only: AF18OF 35 MJ, AF16OF 25MJ.

Wonderfire Fan forced boxThe fan forced box, an accessory for the Wonderfire Model AF 180F. It has been designed to increase the amount of warmth the Wonderfire produces.

A unique heat exchange at the top of the box is heated by hot flue gases that normally escape unused up your chimney. The three speed fan gently helps circulate the heated air inside the heat exchanger around your room. The fan forced box can be fifted into an existing chimney using oneof our standard cast iron facias or can be adapted by your Wonderfire dealer into a new installation where no fireplace currently exists.

Specifications: Electrical Connection. 24OV, standard 3pin 10amp plug. 3 speed fan. Will heat 120 cubic metres of average insulated house using the AF180F.

Wonderfire Type 11 Open Gas Fire The answer for those people that don't have an existing fireplace, and can only connect to LPG, the Type 11 is complete with its own convector fireplace. A double skinned convection box surrounds the fire so that room air circulates around the sides and back of the fireplace bringing all the heat from the fire into the room. You have the freedom to have an efficient gas open fire almost anywhere you want.

Specifications: Natural or LPG gas 22MJ. 150mm flue outlet

Heat output: 2.5kW. Will heat 70 cubic metres of average insulated house.

Performance Gas Flame 290 Gas Flame 290C Gas Flame 420 Gas Flame 420C Gas Flame 600 Grate Gas Flame 600 In Fire Box
(Megajoules)
Natural Gas
30 30 40 40 40 40
LPG 30 30 36 36 36 36
Dimension
Length (mm) 310 280 440 410 520 720
Width (mm) 120 120 120 120 300 350
Height (mm) 245 245 245 245 220 650
( burner height only, coals can be stacked higher )


Top of page

Nectre Wood | Nectre Gas | Wonderfire | contact form | home